Shop by Vehicle

ATV Parts

Shop by Brand

Home » Suspension » Suspension Accessories » Bump Stops » King Shocks Bump Stops

Productline Image

King Shocks Bump Stops

King bump stops provide an additional level of bottoming control when you are using every bit of suspension travel available.

  • $521.55
    Qty:
    Add To WishList
    King Shocks Front 2.0 Bump Stop Set - 20001-150
    • Wrangler JK & JL
    • 2.0 inch diameter
    • Front bump stops
    • Double sealed Schrader cover that mounts to the body
    • Unique mounting boss design with indexing pin securely locates the bump stop without pinching the outside of the tube
    • Stout 1/8" thick Chromoly bump stop body
    • Precision bored to within +/- .001
    • Aluminum components are machined from aircraft quality billet
    • Long wearing nylon contact pad insures quiet operation
    • Mounts with a simple yet effective single bolt design
    • O-ring on shaft helps to gauge shaft travel
    • Sold in sets of 2
    • California Residents: WARNING
  • $848.99
    Qty:
    Add To WishList
    Rear 2.0 Bump Stops
    • Fits 2007 to 2016 JK Wrangler, Rubicon and Unlimited
    • 2 and 4-door models
    • Rear
    • Adustable
    • Sold as a pair
    • California Residents: WARNING
  • $825.55
    Qty:
    Add To WishList
    King Shocks Front 2.0 Bump Stop Set - 20AB001-101
    • Front bump stops
    • 80 Series Toyota Land Cruisers
    • 2.0 inch diameter body
    • Double sealed Schrader cover that mounts to the body
    • Unique mounting boss design with indexing pin securely locates the bump stop without pinching the outside of the tube
    • Stout 1/8" thick Chromoly bump stop bodies are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
    • Aluminum components are machined from aircraft quality billet
    • Long wearing nylon contact pad insures quiet operation and mounts with a simple yet effective single bolt design
    • O-ring on shaft helps to gauge shaft travel
    • Sold in sets of 2
    • California Residents: WARNING
  • $825.55
    Qty:
    Add To WishList
    King Shocks Rear 2.0 Bump Stop Set - 20AB001-102
    • Rear bump stops
    • 80 Series Toyota Land Cruisers
    • 2.0 inch diameter body
    • Double sealed Schrader cover that mounts to the body
    • Unique mounting boss design with indexing pin securely locates the bump stop without pinching the outside of the tube
    • Stout 1/8" thick Chromoly bump stop bodies are precision bored to within +/- .001, then honed after cadmium plating to remove buildup for a tight piston seal and optimum valving function
    • Aluminum components are machined from aircraft quality billet
    • Long wearing nylon contact pad insures quiet operation and mounts with a simple yet effective single bolt design
    • O-ring on shaft helps to gauge shaft travel
    • Sold in sets of 2
    • California Residents: WARNING
  • $825.55
    Qty:
    Add To WishList
    King Shocks OEM Performance Series Wrangler JL Rear 2.0 Bump Stop Kit - 20AB001-106
    • Rear bump stop kit
    • Attached to vehicle frame
    • Creates additional forces as the suspension components reach their maximum upper position
    • Large shaft diameter creates gas spring force in addition to hydraulic resistance force
    • Sold in pairs
    • California Residents: WARNING
  • $270.75
    Qty:
    Add To WishList
    Bump Stop , Shorty
    • 2 x 2"
    • Double sealed Schrader cover
    • 4130 Chromoly mounting sleeves
    • Unique mounting boss design with indexing pin securely locates the bump stop without pinching the outside of the tube
    • Large 1-1/4" or 1-5/8" diameter shafts have a minimum tensile strength of 75,000 pounds per square inch
    • Aluminum components are machined from aircraft quality billet
    • O-ring on shaft helps to gauge shaft travel
    • Mounts with a simple yet effective single bolt design
    • California Residents: WARNING
  • $39.45
    Qty:
    Add To WishList
    King Shocks Bump Stop Mounting Sleeve - BS2041
    • 2.0 x 4
    • Sold individually
    • Bump stop mounting sleeves are made from tough .093 wall Chromoly tubing. Supplied raw, the mounting sleeves are ready to be welded to your chassis
    • Laser cut tops hold the mounting boss securely and have indexing holes to keep bumpstops from rotating
    • Sleeves are counter bored from the top side before the mounting plates are tig welded on to provide room for bumpstop expansion during use.
    • The first 1 inch of the completed tube is bored to size for a snug fit where the bumpstop body is supported by the wiper cap. Bumpstops are supported all the way around the outside diameter without interfering with the precision fit of the piston in the tube.
    • California Residents: WARNING
  • $39.99
    Qty:
    Add To WishList
    King Shocks Bump Stop Mounting Sleeve - BS2541
    • 2.5 x 4
    • Sold individually
    • Bump stop mounting sleeves are made from tough .093 wall Chromoly tubing. Supplied raw, the mounting sleeves are ready to be welded to your chassis
    • Laser cut tops hold the mounting boss securely and have indexing holes to keep bumpstops from rotating
    • Sleeves are counter bored from the top side before the mounting plates are tig welded on to provide room for bumpstop expansion during use.
    • The first 1" of the completed tube is bored to size for a snug fit where the bumpstop body is supported by the wiper cap. Bumpstops are supported all the way around the outside diameter without interfering with the precision fit of the piston in the tube.
    • California Residents: WARNING